Print this pagePrint this page

Email this topicEmail this topic

View PDFView PDF

Download EPUBDownload EPUB

set sntp poll-timeout

Use this command to set the poll timeout (in seconds) for a response to a unicast SNTP request.

Syntax

set sntp poll-timeout timeout

Parameters

timeout Specifies the poll timeout in seconds. Valid values are 1 to 30. Default value is 5 seconds.

Defaults

None.

Mode

All command modes.

Example

This example shows how to set the SNTP poll timeout to 10 seconds:

System(rw)->set sntp poll-timeout 10
Published May 2016prev | next

Email this topicEmail this topic

Print this pagePrint this page