show multiauth counters

Use this command to display MultiAuth counter values.

Syntax

show multiauth counters [[cep | dot1x | mac | pwa | radius-snooping] [chassis] | port port-string]]

Parameters

cep Displays CEP authentication MultiAuth statistics.
dot1x Displays 802.1x authentication MultiAuth statistics.
mac Displays MAC authentication MultiAuth statistics.
pwa Displays PWA authentication MultiAuth statistics.
radius-snooping Displays radius-snooping MutliAuth statistics.
port-string Specifies a port or range of ports to display.

Defaults

Displays MultiAuth counter information for all parameters.

Mode

All command modes.

Example

This example shows how to display multiple authentication session-timeout values, for an active session:

System(su)->show multiauth counters
Location   Authentication Type
           dot1x      pwa        mac        cep
           ---------- ---------- ---------- ----------
chassis    0          0          0          0
ge.1.1     0          0          0          0
ge.1.2     0          0          0          0
.
.
.
lag.0.45   0          0          0          0
lag.0.46   0          0          0          0
lag.0.47   0          0          0          0
lag.0.48   0          0          0          0