Print this pagePrint this page

Email this topicEmail this topic

View PDFView PDF

Download EPUBDownload EPUB

set spantree bridgehellomode

Use this command to enable or disable bridge hello mode on the device.

Syntax

set spantree bridgehellomode {enable | disable}

Parameters

enable Enables single Spanning Tree bridge hello mode.
disable Disables single Spanning Tree bridge hello mode, allowing for the configuration of per-port hello times.

Defaults

None.

Mode

All command modes.

Example

This example shows how to disable single Spanning Tree hello mode on the device. Per-port hello times can now be configured using the set spantree porthellomode command as described in set spantree porthello:

System(rw)->set spantree bridgehellomode disable
Published May 2016prev | next

Email this topicEmail this topic

Print this pagePrint this page