Use this command to configure an MD5 keychain for this sham link.
| area-id | Specifies the OSPF area the two PE routers belong to. |
| source-ipv6-address | Specifies the source IPv6 address for this sham link. |
| destination-ipv6-address | Specifies the destination IPv6 address for this sham link. |
| name | Specifies the name of the OSPF keychain that holds MD5 keys. |
None.
VRF configuration, OSPF router configuration.
The “no” form of this command removes the current keychain from the sham link.
This example shows how to configure keychain keychain1 to a sham link between two PE routers with a source address of 2001:FA04:0005:0001::0 and a destination address of 2002:FA04:0005:0002::0 on OSPF router instance 10, VRF doc:
System(su)->router doc System(su-doc)->configure System(su-doc-config)->ipv6 router ospf 10 System(su-doc-config-ospf-10)->enable-pe-ce System(su-doc-config-ospf-10)->area 10 sham-link 2001:FA04:0005:0001::0 2002:FA04:0005:0002::0 keychain keychain1
Print
this page
Email this topic
Feedback
View PDF
Download EPUB