Use this command to clear ports from the disabled state that have been disabled due to the first use of a policy rule on those ports.
| all | port-string | Clears all ports or specific port(s) from the disabled state. |
None.
All command modes.
This command is only in effect if the port disable function has been enabled using the set policy rule command as described in set policy rule (S-, K-Series). To become active again, disabled ports must also be removed from the policy usage list as described in clear policy usage-list (S-, K-Series).
This example shows how to clear all disabled ports from the disabled state:
System(rw)->clear policy disabled-ports all
Print
this page
Email this topic
Feedback
View PDF
Download EPUB