Use this command to manually unlock a blocked port and optionally, per SID.
| port-string | Specifies port(s) for which to clear the Loop Protect lock. For a detailed description of possible port-string values, refer to the S-, K-, and 7100 Series Configuration Guide. |
| sid sid | (Optional) Specifies the specific Spanning Tree(s) for which to clear the Loop Protect lock. Valid values are 0 - 4094. If not specified, SID 0 is assumed. |
If no SID is specified, SID 0 is assumed.
All command modes.
The default state is unlocked.
This example shows how to clear Loop Protect lock from ge.1.1:
System(rw)->show spantree lplock port ge.1.1 LoopProtect Lock status for port ge.1.1 , SID 0 is LOCKED. System(rw)->clear spantree lplock ge.1.1 System(rw)->show spantree lplock port ge.1.1 LoopProtect Lock status for port ge.1.1 , SID 0 is UNLOCKED.
Print
this page
Email this topic
Feedback
View PDF
Download EPUB