Use this command to globally enable or disable anti-spoofing on the switch.
| enable | Globally enable anti-spoofing on the switch. |
| disable | Globally disable anti-spoofing on the switch (default). |
Anti-spoofing is globally disabled by default.
All command modes.
Anti-spoofing must be globally enabled to be operational on the switch. One or more anti-spoofing features must be enabled on the port for frame snooping to take place. Port enabled anti-spoofing features are:
Any action that will be taken when an anti-spoofing violation occurs is configured in an anti-spoofing class (see set antispoof class and set antispoof class threshold-index).
This example shows how to globally enable anti-spoofing on the switch:
System(rw)->set antispoof enable System(rw)->
Print
this page
Email this topic
Feedback
View PDF
Download EPUB