clear physical assetid

Use this command to reset the asset ID for a module to a zero-length string.

Syntax

S- and K-Series

clear physical assetid {chassis chassis | module module | sub-module slot module | powersupply powersupply | poe-powersupply poe-powersupply | fan fan}

7100-Series

clear physical assetid {chassis chassis | module module | powersupply powersupply | fan fan}

Parameters

chassis	Clears an asset ID for this chassis.
module `module`	Clears an asset ID for a specific module.
sub-module `slot` `module`	Clears an asset ID for the sub-module installed in its parent module expansion slot. slot specifies the chassis slot the parent module is installed in. module specifies the sub-module ID (S-, K-Series).
powersupply `powersupply`	Clears an asset ID for the specified power supply.
poe-powersupply `poe-powersupply`	Clears an asset ID for the specified POE power supply (S-, K-Series).
fan `fan`	Clears an asset ID for the specified fan.

Defaults

None.

Mode

All command modes.

Usage

The sub-module and poe-powersupply options are supported on the S- and K-Series platforms.

Example

This example shows how to clear the asset ID for module 1:

System(rw)->clear physical assetid module 1
System(rw)->

Published May 2016prev | next

Email this topic

Print this page Print this page

Leave feedback Feedback