Use this command to assign an OSPF route filter route-map with the distribute-list for the purpose of filtering routes being installed into the route table.
| name | Specifies the OSPF route filter route-map to associate with this distribute-list. |
None.
OSPF router configuration.
See Filter-Based Route-Map Commands for a detailed discussion of OSPF filter-based route-map commands.
The “no” form of this command clears the specified route-map from the distribute-list.
This example shows how to assign the ospf1 filter route-map to the distribute-list for this OSPF router:
System(rw-config)->router ospf 1 System(rw-config-ospf-1)->distribute-list route-map ospf1 in
Print
this page
Email this topic
Feedback
View PDF
Download EPUB