Network connectivity devices transmit only LLDP TLVs in LLDP PDUs until they detect that an LLDP-MED endpoint device has connected to a port.
| count | Specifies the number of fast start LLDPDUs to be sent when an LLDP-MED endpoint device, such as a phone, is detected. Value can range from 1 to 10. Default is 3. |
None.
All command modes.
When an LLDP-MED endpoint device, such as a phone, has connected to a port, the network connectivity device starts sending LLDP-MED TLVs at a fast start rate on that port. Use this command to set the number of successive LLDPDUs (with LLDP-MED TLVs) to be sent for one complete fast start interval.
This example sets the number of fast start LLDPDUs to be sent to 4.
System(rw)->set lldp med-fast-repeat 4
Print
this page
Email this topic
Feedback
View PDF
Download EPUB