enable-pe-ce

Use this command to enable the Customer Edge (CE) routers as Provider Edge (PE) router peers.

Syntax

enable-pe-ce
no enable-pe-ce

Parameters

None.

Defaults

CE routers are disabled as PE router peers by default.

Mode

VRF configuration, OSPFv3 router configuration.

Usage

Enabling CE routers as PE router peers is defined in RFC 6565.

The “no” form of this command disables CE routers as PE router peers for this device.

Example

This example enables CE routers as PE router routing peers for this device:

System(su)->router doc
System(su-doc)->configure
System(su-doc-config)->router ospf 10
System(su-doc-config-ospf-10)->enable-pe-ce
System(su-doc-config-ospf-10)->