Print this pagePrint this page

Email this topicEmail this topic

View PDFView PDF

Download EPUBDownload EPUB

set cdp hold-time

Use this command to set the hold time value for CDP discovery protocol configuration messages.

Syntax

set cdp hold-time hold-time-val

Parameters

hold-time-val Specifies the hold time value for CDP messages in seconds.Valid values are 15–600. The default value is 180 seconds.

Defaults

None.

Mode

All command modes.

Example

This example shows how to set CDP hold time to 60 seconds:

System(rw)->set cdp hold-time 60
Published May 2016prev | next

Email this topicEmail this topic

Print this pagePrint this page