show ike map

Use this command to display IKE map configuration.

Syntax

show ike map

Parameters

None.

Defaults

None.

Mode

All command modes.

Example

This example shows how to display IKE map information:

System(su)->show ike map
IPIke map winRadiusV6 (index 0)
 Policy id:                winRadiusV6
 Proposal id:              winRadiusV6_quick
 Protocol:                 udp
 Lifetime (time):          5 minutes
 Lifetime (bandwidth):     100000 kilobytes
 Src addr:                 2001:4094::102/128
 Dst addr:                 2001:14::172:1:191:210/128
 Src port:                 0
 Dst port:                 0
 Encap mode:               transport
 Valid config:             yes
 Request:                  Disabled
 Status flags:
IPIke map winRadius (index 1)
 Policy id:                winRadius
 Proposal id:              winRadius_quick
 Protocol:                 udp
 Lifetime (time):          5 minutes
 Lifetime (bandwidth):     100000 kilobytes
 Src addr:                 1.1.191.6/32
 Dst addr:                 1.1.191.22/32
 Src port:                 0
 Dst port:                 0
 Encap mode:               transport
 Valid config:             yes
 Request:                  Disabled
 Status flags:
System(su)->