Print this pagePrint this page

Email this topicEmail this topic

View PDFView PDF

Download EPUBDownload EPUB

clear policy maptable

Use this command to clear a VLAN to policy mapping table entry or to reset the maptable response to the default value of policy mode.

Syntax

clear policy maptable {vlan-list | response}

Parameters

vlan-list Specifies the VLAN ID or range of IDs (1 to 4094) to clear.
response Specifies that the response should be reset to the default value of policy.

Defaults

None.

Mode

All command modes.

Examples

This example resets the policy mappings table response to the default value of policy.

System(rw)->clear policy maptable response

This example deletes the policy mappings table for VLAN 1 and VLAN 2.

System(rw)->clear policy maptable 1-2
Published May 2016prev | next

Email this topicEmail this topic

Print this pagePrint this page