Use this command to display OSPFv3 information.
| process-id | (Optional) Specifies a configured OSPF process by its process ID. If process-id is included, information for the specified routing process only is displayed. |
| ifName | (Optional) Displays OSPF information for an interface, such as a specific VLAN. The interface must be configured for IP routing as described in the S-, K-, and 7100 Series Configuration Guide. |
None.
All command modes.
This example shows how to display OSPFv3 information:
Print
this page
Email this topic
Feedback
View PDF
Download EPUBSystem(rw)->show ipv6 ospf
Routing Process ospf 41 with ID 21.10.1.3
Supports only single TOS(TOS0) route
It is an area border and autonomous system boundary router
Summary Link update interval is 1800 seconds.
External Link update interval is 1800 seconds.
Redistributing External Routes from:
Area BACKBONE (0)
Number of interfaces in this area is 8
SPF algorithm executed 7 times
Area 0.0.0.1
Number of interfaces in this area is 1
SPF algorithm executed 7 times