show ipv6 twcb statistics

Use this command to display TWCB statistics data.

Syntax

show ipv6 twcb statistics [-interesting] [-all_vrfs]

Parameters

-interesting	(Optional) Displays only counters with non-zero values.
-all_vrfs	(Optional) Displays statistics for all VRFs.

Defaults

If no option is specified, all statistics for the current VRF context display.

Mode

All command modes.

Usage

TWCB statistics display as a combined IPv4 and IPv6 counter value.

Example

This example displays TWCB statistics data:

System(rw)->show ipv6 twcb statistics
NOTE: This command displays statistics combined from both IPv4 and IPv6 TWCB.
TWCB Statistics
                Current    High       Deleted    Total
Bindings        0          0          0          0
Resources
Bindings Exhausted:       0          No Caches:                0
No IPv6 Portmap Port:     0
Webcaches Active:         0          Webcaches Active High:    0
Serverfarms Active:       0          Serverfarms Active High:  0
Caches Active:            0          Caches Active High:       0
Counters Last Cleared: TUE JUL 17 12:53:22 2012
TWCB Extended Statistics (Normalized for 5 seconds)
Bindings Per Sec:         0
System(rw)->

Published May 2016prev | next

Email this topic

Print this page Print this page

Leave feedback Feedback