clear macsec port mka

Use this command to rest the MACsec Key Agreement (MKA) protocol to the default setting for this port access entity.

Syntax

clear macsec port mka port-string

Parameters

port-string (Optional) Specifies the port(s) to reinitialize or reauthenticate.

Defaults

The MKA protocol is globally disabled by default on all ports.

If a portā€or ports are not specified, the command applies to all ports.

Mode

All command modes.

Example

This example shows how to reset the MKA protocol to the default value on all ports:

System(rw)->set macsec port mka