Use this command to display the status of MAC address traps on one or more ports.
| port-string | (Optional) Displays MAC address traps for specific port(s). For a detailed description of possible port-string values, refer to the S-, K-, and 7100 Series Configuration Guide. |
If port-string is not specified, MAC address traps for all ports will be displayed.
All command modes.
This example shows how to display the status of MAC address traps on ge.1.1 through 3:
System(rw)->show newaddrtrap New Address Traps Globally disabled Port Enable State --------- ------------ ge.1.1 disabled ge.1.2 disabled ge.1.3 disabled
Print
this page
Email this topic
Feedback
View PDF
Download EPUB