show macsec port

Use this command to display port configuration for one of more MACsec-capable ports.

Syntax

show macsec port port-string

Parameters

port-string

(Optional) Port or range of ports.

Defaults

If a specific port or range of ports is not selected, information for all MACsec-capable ports appears.

Mode

All command modes.

Example

This example shows how to display port configuration for MACsec-capable port "ge.1.10":

System(su)->show macsec port ge.1.10
Port: ge.1.10
Port Number                 : 12010
Port Type                   : real
Controlled Port Number      : 12610
Uncontrolled Port Number    : 12310
Common Port Number          : 12010
Port Capabilities           : 0x70
  Supplicant    : no
  Authenticator : yes
  MKA           : yes
  MACsec        : yes
  Announcements : no
  Listener      : no
  Virtual Ports : no
Virtual Ports Enable        : disable
Logon Enable                : enable
Authenticator Enable        : enable
Supplicant Enable           : disable
KaY MKA                     : enable
Announcer                   : disable
Listener                    : disable

Published May 2016prev | next

Email this topic

Print this page Print this page

Leave feedback Feedback