Use this command to configure the time a MEP defect must be absent before an alarm is reset.
| time | Specifies the number of centiseconds a MEP defect must be absent before an alarm is reset. Valid values are 250 - 1000 centiseconds. The default value is 1000 centiseconds (10 seconds). |
1000 centiseconds (10 seconds).
Maintenance End-Point Configuration mode.
The “no” form of this command resets the amount of time a MEP defect must be absent before an alarm is reset to the default value of 250 centiseconds.
This example shows how to set the amount of time a myMA1 MEP 1000 defect must be absent before an alarm is reset to 3.5 seconds:
System(rw-config)->cfm md string-name myMD1 System(su-config-cfm-md.1)->ma string-name myMA1 System(su-config-cfm-ma.1)->mep 1000 System(su-config-cfm-mep.1000)->reset-time 350 System(su-config-cfm-mep.1000)->
Print
this page
Email this topic
Feedback
View PDF
Download EPUB