set port tcioverwrite (S-, K-Series)

Use this command to enable or disable the TCI overwrite function on one or more ports.

Syntax

set port tcioverwrite port-string {enable | disable}

Parameters

port-string Specifies port(s) on which to enable or disable the TCI overwrite function.
enable | disable Enables or disables the TCI overwrite function.

Defaults

None.

Mode

All command modes.

Usage

When enabled, this allows policy rules to overwrite user priority and other classification information in the VLAN tag‘s TCI field. The set port tcioverwrite command, when enabled, also overwrites ingressing frames tagged to a port VLAN and policy assignment, if a policy has not already been assigned.

Example

This example shows how to enable TCI overwrite on port ge.1.3:

System(rw)->set port tcioverwrite ge.1.3 enable