Use this command to set the stalled condition port check sample interval.
| seconds | Specifies the number of seconds between checks for the port stalled condition. Valid values are 1 - 4294967295. The default value is 1 second. |
1 second.
All command modes.
If congestion is detected on the port egress queues, the sample interval timer is turned on. If the configured minimum number of packets have not been transmitted at the end of the sample interval, the port is considered to be in a stalled state. One of three configurable actions can occur if the port buffer remains in a stalled state for a set number of consecutive sample intervals for that action.
This example shows how to set the sample interval to 3 seconds:
System(rw)->set txqmonitor sampleinterval 3 System(rw)->
Print
this page
Email this topic
Feedback
View PDF
Download EPUB