clear auto-tracking

Use this command to reset auto-tracking state to the default value globally or on the specified port.

Syntax

clear auto-tracking {all | port port-string}

Parameters

all Resets auto-tracking state globally on the switch to the default value of disabled.
port port-string Specifies the port to reset auto-tracking configuration to the default value of disabled.

Defaults

None.

Mode

All command modes.

Examples

This example shows how to disable auto-tracking globally on the switch:

System(rw)->clear auto-tracking all

This example shows how to disable auto-tracking on port tg.1.1:

System(rw)->clear auto-tracking port tg.1.1