Use this command to set the PWA port control mode.
| enable | disable | Enables or disables PWA on the specified port. |
| port-string | (Optionally) Enables or disables a specific port(s). For a detailed description of possible port-string values, refer to Port String Syntax Used in the CLI in the S-, K-, and 7100 Series Configuration Guide. |
Enables or disables all ports if no port is specified.
All command modes.
This example shows how to enable PWA on all ports:
System(rw)->set pwa portcontrol enable
Print
this page
Email this topic
Feedback
View PDF
Download EPUB