Use this command to clear all existing CEP connections for one or more CEP-enabled ports.
| port-string | (Optional) Specifies the CEP-enabled port(s) to clear existing CEP connections. This must be a port-string enabled for CEP using the set cep port command as described in set cep port. |
If no port-string is specified, all existing CEP connections on all ports are cleared.
All command modes.
This command is similar to the clear cep users command.
This example shows how to re-initialize CEP ports ge.1.3-5:
System(rw)->set cep initialize ge.1.3-5
Print
this page
Email this topic
Feedback
View PDF
Download EPUB