Use this command to enable or disable one or more ports for MAC authentication.
| enable | disable | Enables or disables MAC authentication. |
| port-string | Specifies port(s) on which to enable or disable MAC authentication. For a detailed description of possible port-string values, refer to the S-, K-, and 7100 Series Configuration Guide. |
None.
All command modes.
Enabling port(s) for MAC authentication requires globally enabling MAC authentication on the device as described in set macauthentication, and then enabling it on a port-by-port basis. By default, MAC authentication is globally disabled and disabled on all ports.
This example shows how to enable MAC authentication on ge.2.1 though 5:
System(rw)->set macauthentication port enable ge.2.1-5
Print
this page
Email this topic
Feedback
View PDF
Download EPUB