clear port operstatuscause

Use this command to override the causes configured to place operating status to a down or dormant state for one or more ports.

Syntax

clear port operstatuscause [port-string] [admin] [all] [cos] [flowlimit] [linkflap] [oam] [oamlb] [policy]

`port-string`	(Optional) Overrides causes for specific port(s).
admin	(Optional) Resets adminStatus to up.
all	(Optional) Overrides all modifiable operStatus down causes.
cos	(Optional) Overrides a Class of Service constraint.
flowlimit	(Optional) Overrides a flow limiting constraint.
linkflap	(Optional) Overrides link flap violation status.
oam	(Optional) Overrides Ethernet OAM operStatus down causes.
oamlb	(Optional) Overrides Ethernet OAM loopback operStatus down causes.
policy	(Optional) Overrides a policy restriction.

If no options are specified, all operating status causes will be overridden for all ports.

All command modes.

The oamlb option is supported on the S- and K-Series platforms.

This example shows how to override all operational causes on all ports:

System(rw)->clear port operstatuscause

Published May 2016prev | next