set netflow export-rate

Use this command to control number of NetFlow records per second that can be generated per module.

Syntax

set netflow export-rate rate [slot]

`rate`	Specifies the number of entries per second per module. Valid values are 1 - 20000 entries per second. Default value is 10000 entries per second.
`slot`	(Optional) Specifies the chassis slot number the configured rate is applied to.

The NetFlow export rate defaults to 10000 entries per second.
If the slot option is not specified, the rate configuration applies to all modules in the chassis.

All command modes.

Use the show netflow command to display the current and maximum supported export data rate for this device.

Use the clear netflow export-rate command to reset the export rate to the default value.

This example shows how to set the NetFlow export rate to 12000 entries per second:

System(rw)->set netflow export-rate 12000
System(rw)->

Published May 2016prev | next