Use this command to administratively clear an SNMP engine ID.
None.
None.
All command modes.
Changes to the SNMP engine ID require a device reset to take effect. All SNMP user configuration must be removed before resetting the SNMP engine ID.
If C2 security mode is enabled, you can not clear an SNMP engine ID configuration while in Read-Write user mode.
This example shows how to reset the SNMP engine ID to DocumentationSystem1eng1:
System(rw)->set snmp engineid DocumentationSystem1eng1 Warning: Changes to the Engine ID require a device reset to take effect. Warning: All SNMP user configuration must be removed before resetting. System(rw)->
Print
this page
Email this topic
Feedback
View PDF
Download EPUB