Use this command to enable or disable the current CLI session as a Syslog destination.
| enable | disable | Enables or disables display of logging messages for the current CLI session. |
None.
All command modes.
The effect of this command will be temporary if the current CLI session is using Telnet or SSH, but persistent on the console.
If C2 security mode is enabled, You can not create, modify, or clear a logging here configuration while in Read-Write user mode.
This command shows how to enable the display of logging messages to the current CLI session:
System(rw)->set logging here enable
Print
this page
Email this topic
Feedback
View PDF
Download EPUB