Print this pagePrint this page

Email this topicEmail this topic

View PDFView PDF

Download EPUBDownload EPUB

clear policy dynamic (S-, K-Series)

Use this command to reset the status of dynamically assigned policy profiles back to defaults.

Syntax

clear policy dynamic {[syslog-default] [trap-default]}

Parameters

syslog-default Resets the status of the sending of Syslog messages when a dynamic rule is applied to enabled.
trap-default Resets the status of the sending of SNMP trap messages when a dynamic rule is applied to enabled.

Defaults

None.

Mode

All command modes.

Example

This example shows how to reset the sending of Syslog messages when a dynamic rule is applied to enabled:

System(rw)->clear policy dynamic syslog-default
Published May 2016prev | next

Email this topicEmail this topic

Print this pagePrint this page