Use this command to display the contents of the MPLS Label Forwarding Information Base (LFIB).
| ip-address/length | (Optional) Specifies the IPv4 or IPv6 address and length of the LFIB entries to display. |
| interface-name | (Optional) Specifies the outgoing interface of the LFIB entries to display. |
| label label | (Optional) Specify the local or outgoing label to display. Valid values are 1 – 1048576. |
| detail | (Optional) Specifies that a detailed level of information should display. |
If no options are specified, a one-line summary level of information displays for each LFIB entry.
All command modes.
This example shows how to display a summary level of information for all LFIB entries:
System(rw)->show mpls forwarding-table Local Outgoing Prefix Outgoing Next Hop tag tag or VC or Tunnel Id interface 57 0 173.6.1.1/32 78 77 192.17.170.80/32 vlan.0.46 192.18.170.17 80 53 192.17.170.3/32 vlan.0.36 192.17.170.41 81 51 192.17.170.32/29 vlan.0.36 192.17.170.41 82 45 173.101.173.0/24 vlan.0.610 192.17.170.49 83 48 192.17.170.10/32 vlan.0.610 192.17.170.49 84 30 173.4.1.0/24 vlan.0.36 192.17.170.41 85 31 173.4.2.0/24 vlan.0.36 192.17.170.41 86 32 173.4.3.0/24 vlan.0.36 192.17.170.41 ... 171 185 173.7.9.0/24 vlan.0.610 192.17.170.49 171 134 173.7.9.0/24 vlan.0.26 192.17.170.65 173 186 173.7.10.0/24 vlan.0.610 192.17.170.49 173 135 173.7.10.0/24 vlan.0.26 192.17.170.65 System(rw)->
Print
this page
Email this topic
Feedback
View PDF
Download EPUB