Use this command to display the status of the Spanning Tree algorithm on one or more ports.
| port port-string | (Optional) Displays status for specific port(s). For a detailed description of possible port-string values, refer to Port String Syntax Used in the CLI in the S-, K-, and 7100 Series Configuration Guide. |
If port-string is not specified, status will be displayed for all ports.
All command modes.
This example shows how to display port admin status for ge.1.7:
System(rw)->show spantree portadmin port ge.1.7 Port ge.1.7 has portadmin set to enable on SID 0
Print
this page
Email this topic
Feedback
View PDF
Download EPUB