show sla entry detail

Use this command to display the configuration and scheduling information of the selected IP SLA entry.

Syntax

show sla entry entry detail

Parameters

entry The number of the IP SLA entry.

Defaults

None.

Mode

All command modes.

Example

System(su)->show sla entry 2 detail
Entry:                             2  Type:                             echo
Collections:                       2  Probe:                     sla-timing1
Destination:                 3504::1
Distribution count:                0  Distribution interval (ms):         25
History collections:               0  History wrap:                      off
History bucket count:             15  History ageout (minutes):            0
History bucket type:          static  History bucket depth (samples):     16
Monitor path count:                2  Monitor hop count                    4
Scheduling
Start-time:      2012-10-11:20.00.12  Recurrence (seconds):              300
Repetitions:                       2  Duration (seconds):                120
Frequency (seconds):              30  State:                         Running
Status:
  Test 2 of 2 ends in 89 seconds
Displayed 1 sla entry