Use this command to display information about which optional TLVs have been configured to be transmitted on ports.
| data-center-bridging | (Optional) Displays data center bridging specific status including Enhanced Transmission Selection configuration, recommendation, and priority flow control. |
| port-string | (Optional) Displays information about TLV configuration for one or a range of ports. |
If port-string is not specified, TLV configuration information will be displayed for all ports.
If data-center-bridging is not specified, Data Center Bridging (DCB) specific status is not displayed for the ports.
All command modes.
Ports are configured to send optional TLVs with the command.
When the data-center-bridging option is specified, ETS Con refers to LLDP?DCB Enhanced?Trans?Config TLV and ETS Rec refers to LLDP-DCB Enhanced-Trans-Rec TLV.
This example shows how to display transmit TLV information for port ge.1.25.
Print
this page
Email this topic
Feedback
View PDF
Download EPUBSystem(rw)->sh lldp port tx-tlv ge.1.25
* Means TLV is supported and enabled on this port
o Means TLV is supported on this port
Means TLV is not supported on this port
Column Pro Id uses letter notation for enable: s-stp, l-lacp, g-gvrp
For Data Center Bridging (DCB) TLV breakdown use data-center-bridging option
Ports Port Sys Sys Sys Mgmt Vlan Pro MAC PoE Link Max MED MED MED MED DCB EEE
Desc Name Desc Cap Addr Id Id PHY Aggr Frame Cap Pol Loc PoE
------- ---- ---- ---- --- ---- ---- ---- --- --- ---- ---- --- --- --- --- --- ---
ge.1.25 o o o o o o o o o o o o o o o o o
This example shows how to display Data Center Bridging (DCB) information for three ports.
System(rw)->show lldp port tx-tlv data-center-bridging ge.1.1-3
* Means TLV is supported and enabled on this port
o Means TLV is supported on this port
Means TLV is not supported on this port
Ports ETS ETS PFC App CN
Con Rec Pri
------- ---- ---- ---- --- ---
ge.1.1 o o o o o
ge.1.2 o o o o o
ge.1.3 o o o o o