clear bonding chassis

Use this command to clear the VSB chassis ID and VSB system ID if the chassis has not yet been VSB enabled globally.

Syntax

clear bonding chassis chassis-id [secret] [lfr-priority]

Parameters

`chassis-id`	Specifies the chassis ID of the chassis to clear from the VSB system. Valid values are 1-8.
secret	(Optional) Clears any shared secret configuration.
lfr-priority	(Optional) Resets the LFR priority to the default of 10 times the VSB chassis ID.

Defaults

If only the chassis-id is specified, all VSB chassis configuration is cleared for this physical chassis.
If the secret option is specified, any configured secret is cleared.
If the lfr-priority option is specified, the LFR priority is reset to the default value of 10 times the chassis ID.

Mode

All command modes.

Example

This example clears the chassis ID and associated system ID for chassis 2:

System(rw)->clear bonding chassis 2
This command will reset and clear the current running configuration on chassis 2.
Are you sure you want to continue? (y/n) [n]?y
System(rw)->

Published May 2016prev | next

Email this topic

Print this page Print this page

Leave feedback Feedback