clear policy rule (7100-Series)

Use this command to delete one or all policy classification rule entries.

Syntax

clear policy rule profile-index {all-pid-entries | ether | ip6dest | ipdestsocket | ipfrag | ipproto | ipsourcesocket | iptos | ipttl | macdest | macsource | port | tcpdestportIP | tcpsourceportIP | udpdestportIP | udpsourceportIP} [mask mask] [port-string port-string]

Parameters

`profile-index`	Deletes a rule(s) associated with a specific profile number. Valid profile-index values are 1 - 63.
all-pid-entries	Deletes all rules associated with the specified policy profile index ID.
ether	Deletes associated Ethernet II classification rule.
ip6dest	Deletes associated IPv6 destination classification rule.
ipdestsocket	Deletes associated IP destination with optional post-fixed port classification rule.
ipfrag	Deletes associated IP fragmentation classification rule.
ipproto	Deletes associated IP protocol classification rule.
ipsourcesocket	Deletes associated IP source with optional post-fixed port classification rule.
iptos	Deletes associated IP Type of Service classification rule.
ipttl	Deletes associated IP time-to-live (TTL) classification rule.
macdest	Deletes associated MAC destination address classification rule.
macsource	Deletes associated MAC source address classification rule.
port	Deletes associated port-string classification rule.
tcpdestport	Deletes associated TCP destination port classification rule.
tcpdestportip	Deletes associated TCP destination port classification rule with optional post-fix IP address.
tcpsourceportip	Deletes associated TCP source port classification rule with optional post-fix IP address.
udpdestportip	Deletes associated UDP destination port classification rule with optional post-fix IP address.
udpsourceportip	Deletes associated UDP source port classification rule with optional post-fix IP address.
all-traffic-entries \| `data`	(Optional) Deletes all entries associated with this traffic rule or a specific data value entry. Refer to Valid Values for Policy Classification Rules for valid values for each classification type.
mask `mask`	(Optional) Deletes associated data mask. Refer to Valid Values for Policy Classification Rules for valid values for each classification type and data value.
port-string `port-string`	(Optional) Deletes the rule entries for the specified ingress port.

Defaults

When applicable, data, mask, and port-string must be specified for individual rules to be cleared.

Mode

All command modes.

Example

This example shows how to delete all classification rule entries associated with policy profile 1 from all ports:

System(rw)->clear policy rule 1 all-pid-entries

Published May 2016prev | next

Email this topic

Print this page Print this page

Leave feedback Feedback