Print this pagePrint this page

Email this topicEmail this topic

View PDFView PDF

Download EPUBDownload EPUB

set port discard

Use this command to set the frame discard mode on one or more ports.

Syntax

set port discard port-string {tagged | untagged | none | both}

Parameters

port-string Specifies the port(s) for which to set frame discard mode. For a detailed description of possible port-string values, refer to Port String Syntax Used in the CLI in the S-, K-, and 7100 Series Configuration Guide.
tagged | untagged | none | both Sets the port(s) to discard tagged or untagged frames, no frames, or both types of frames.

Defaults

None.

Mode

All command modes.

Example

This example shows how to set port 7 to discard both tagged and untagged frames:

System(rw)->set port discard ge.2.7 both
Published May 2016prev | next

Email this topicEmail this topic

Print this pagePrint this page