clear port oam uld

Use this command to reset OAM ULD configuration to default values for the specified port.

Syntax

set port oam port-string uld {[mode] [action] [fast-timer]}

mode	(Optional) Resets the ULD mode configuration to the default value of disabled.
action	(Optional) Resets the ULD action to the default value of only sending a Syslog message.
fast-timer	(Optional) Resets the ULD fast timer multiple setting to the default value of 2 (200 milliseconds).

ULD mode defaults to disabled.
ULD action defaults to only sending a Syslog message.
ULD fast-timer multiplier defaults to 2 (fast timer interval of 200 milliseconds).

All command modes.

This example resets the ULD mode for all ports to the default value of disabled:

System(rw)->clear port oam *.*.* uld mode

This example resets ULD mode, action and fast timer to default values for port ge.1.2:

System(rw)->clear port oam ge.1.2 uld mode action fast-timer

Published May 2016prev | next