Use this command to set the maximum BPDU transmission rate.
| txholdcount | Specifies the maximum number of BPDUs to be transmitted before transmissions are subject to a one-second timer. Valid values are 1 - 10. Default value is 6. |
None.
All command modes.
Maximum BPDU transmission rate is the number of BPDUs which will be transmitted before transmissions are subject to a one-second timer.
This example shows how to globally set the transmit hold count to 5:
System(rw)->set spantree txholdcount 5
Print
this page
Email this topic
Feedback
View PDF
Download EPUB