When you have purchased a license, use this command to activate licensed features. If you have activated a license on your S- K- and 7100-Series device, a unique license key will display in the show license command output.
| advanced | Activates advanced routing features on K-Series modules and 7100-Series chassis. |
| port-capacity | Activates the per-port restrictions on the S- or K-Series device. On the S-Series, the port capacity license (S-EOS-PPC) applies to the S130 Class modules and S130 Class SSA only; it does not apply to the S150 Class modules or S150 Class SSA. |
| user-capacity | Sets the user capacity feature key (S-, K-Series). |
| 2x-user-capacity | Sets the user capacity feature key (S-, K-Series). |
| l3-s150 | Sets the S150 Class advanced routing feature key for an S- K- and 7100-Series chassis. These routing features are in the S-EOS-L3-S150 license (S-Series). |
| l3-s130 | Sets the S130 Class advanced routing feature key for an S- K- and 7100-Series chassis. These routing features are in the S-EOS-L3-S130 license (S-Series). |
| license-key | Specifies your unique license key, in ASCII. |
| slot | chassis value | (Optional) Specifies the S- K- or 7100-Series module or chassis on which the port capacity license will be activated. On the S-Series Specifies the S130 Class module or SSA or the S-Series chassis on which the port capacity license (S-EOS-PPC) will be activated. If you are activating the port capacity license on an SSA, use 1 as the slot number. |
If the slot option is not specified, the license is applied to all slots in the system.
The advanced license is required to run K-Series device. A port capacity license is required for each K-Series chassis requiring additional port user capacity. The license removes the per port restriction of 8 users per port for all ports in the chassis allowing for up to of 256 users per port. The total authenticated users in the chassis may not exceed the chassis user capacities maximum as follows: 1152 users on the K-6 chassis and 1920 users on the K-10 chassis.
The S-EOS-L3-S130 license is required to run VRF on the S130 class of fabrics or in the S3 chassis with S130 class I/O module installed. In a mixed chassis of S150 and S130 fabrics, the feature entitlement will revert to the S130 feature set and therefore a license would be required to run VRF in this mixed environment.
The S-EOS-L3-S150 license is not currently available. This license is reserved for future routing enhancements on the S150 class of fabrics.
S- K- and 7100-Series license keys can contain white spaces; therefore, you should enclose your license key in double quotation marks.
All command modes.
This S-Series example shows how to set the port capacity on the modules in slots 1 and 2:
System(rw)->set license port-capacity "0001:S-EOS-PPC:2:12345678:0:Enterprise Name:0:abcdefgh:abcdefghijklmnopqrstuvwxyz123456" slot 1 System(rw)->set license port-capacity "0001:S-EOS-PPC:1:12345678:0:Enterprise Name:0:abcdefgh:abcdefghijklmnopqrstuvwxyz123456" slot 2 This example shows how to set the enhanced access routing on an S-130 class fabric: System(rw)->set license l3-s130 "0001:S-EOS-L3-S130:0:abcdefg:0:Extreme Networks SQA:0:00000000:abcdefghij+abcdefghijklmnopqrst/abcdefghijklmnopqrstuv /1234567890abcdefghijklmno/12345==" This example shows how to set the advanced routing on a K-Series fabric: System(rw)->set license advanced "0001:K-EOS-L3:1:abcdefgh:140:Extreme Networks Research and Development:0:00000000:1324567890abcdefghijklmnopqrstuvwxyz1234567890abcdefghijklmnopqrstuvwxyz1234567890==" This example shows how to set the advanced routing on a 7100-Series device: System(rw)->set license advanced "0001:7100-EOS-L3:1:abcdefgh:140:Extreme Networks Research and Development:0:00000000:1324567890abcdefghijklmnopqrstuvwxyz1234567890abcdefghijklmnopqrstuvwxyz1234567890=="
Print
this page
Email this topic
Feedback
View PDF
Download EPUB