clear license

Use this command to clear license key settings.

Syntax

S-Series

clear license {port-capacity | user-capacity | l3-s150 | l3-s130} license-key [{slot | chassis} value]

K-Series

clear license {port-capacity | user-capacity | advanced} license-key [{slot | chassis} value]

7100-Series

clear license advanced license-key [{slot | chassis} value]

advanced	Removes the advanced routing features on K-Series modules and 7100-Series chassis.
port-capacity	Removes the per-port restrictions on the S- or K-Series device. On the S-Series, the port capacity license (S-EOS-PPC) applies to the S130 Class modules and S130 Class SSA only; it does not apply to the S150 Class modules or S150 Class SSA.
user-capacity	Clears the user capacity feature key (S-, K-Series).
2x-user-capacity	Clears the user capacity feature key (S-, K-Series).
l3-s150	Clears the S150 Class advanced routing feature key for an S- K- and 7100-Series chassis. These routing features are in the S-EOS-L3-S150 license (S-Series).
l3-s130	Clears the S130 Class advanced routing feature key for an S- K- and 7100-Series chassis. These routing features are in the S-EOS-L3-S130 license (S-Series).
`license-key`	Specifies your unique license key, in ASCII.
slot \| chassis `value`	(Optional) Specifies the S- K- or 7100-Series module or chassis on which the port capacity license will be cleared. On the S-Series Specifies the S130 Class module or SSA or the S-Series chassis on which the port capacity license (S-EOS-PPC) will be cleared. If you are clearing the port capacity license on an SSA, use 1 as the slot number.

None.

All command modes.

This S- and K-Series example clears the port-capacity license from slot 1 for the S- or K-Series device:

System(rw)->clear license port-capacity slot 1

Published May 2016prev | next