show ip slb statistics

Use this command to display SLB statistics.

Syntax

show ip slb statistics [-all_vrfs] [-interesting]

Parameters

-all_vrfs	(Optional) Displays SLB statistics for all VRFs.
-interesting	(Optional) Displays only counters with a non-zero value.

Defaults

If no option is specified, all counters for the current VRF context are displayed.

Mode

All command modes.

Usage

This command displays statistics for both IPv4 and IPv6 as a combined value.

Example

This example shows how to display server load balancing connection statistics:

System(rw)->show ipv6 slb statistics
NOTE: This command displays statistics combined from both IPv4 and IPv6 LSNAT.
LSNAT Statistics
                Current    High       Deleted    Total
Bindings        38365      65536      65906      104271
Sticky Entries  16         16         0          16
Resources
Bindings Exhausted:       180        No Real Available:        0
Sticky Entries Exhausted  0          No FTP ALG Available:     0
No Portmap Port:          0
No IPv6 Portmap Port:     0
Vservers Active:          4          Vservers Active High:     4
Serverfarms Active:       2          Serverfarms Active High:  2
Reals Active:             10         Reals Active High:        10
Counters Last Cleared: MON JUL 16 15:19:28 2012
LSNAT Extended Statistics (Normalized for 5 seconds)
Bindings Per Sec:         20
System(rw)->

Published May 2016prev | next

Email this topic

Print this page Print this page

Leave feedback Feedback