Use this command to reset the port protocol migration state machine for one or more Spanning Tree ports. When operating in RSTP mode, this forces a port to transmit MSTP BPDUs.
| port-string | Specifies the port(s) for which protocol migration mode will be enabled. For a detailed description of possible port-string values, refer to Port String Syntax Used in the CLI in the S-, K-, and 7100 Series Configuration Guide. |
| true | Enables protocol migration mode. |
None.
All command modes.
This example shows how to reset the port protocol migration state machine on ge.1.12:
System(rw)->set spantree protomigration ge.1.12 true
Print
this page
Email this topic
Feedback
View PDF
Download EPUB