Use this command to enable or disable link flap monitoring on one or more ports.
| disable | enable | Disables or enables the link flap detection function. |
| port-string | (Optional) Specifies the port(s) on which to disable or enable monitoring. |
If port-string is not specified, all ports will be disabled or enabled.
All command modes.
If disabled globally after per-port settings have been configured using the commands later in this chapter, per-port settings will be retained.
This example shows how to enable the link trap monitoring on all ports:
System(rw)->set linkflap portstate enable
Print
this page
Email this topic
Feedback
View PDF
Download EPUB