set quarantine-agent port

Use this command to enable or disable the quarantine agent on the specified port.

Syntax

set quarantine-agent port {enable | disable} port-string

Parameters

enable	Enables quarantine agent on the specified port.
disable	Disables quarantine agent on the specified port.
port-string	Specifies the port to configure.

Defaults

Quarantine agent is disabled by default on all ports.

Mode

All command modes.

Usage

The quarantine agent must be enabled globally on the switch and locally on the port to be operational on the port. See set quarantine-agent for information on global quarantine agent configuration. See the usage section of set quarantine-agent for a description of quarantine agent dependencies.

Examples

This example shows how to enable quarantine agent on port tg.1.1:

System(rw)->set quarantine-agent port enable tg.1.1

Published May 2016prev | next

Email this topic

Print this page Print this page

Leave feedback Feedback