Viewing the MLD snoop trace information
About this task
Use this procedure to display information about the multicast groups traversing the snoop enabled router.
Procedure
- In the navigation pane, expand the following folders: .
- Click IPv6 MLD.
- Click the Snoop Trace tab.
Snoop Trace field description
Use the data in the following table to use the Snoop Trace tab.
|
Field |
Description |
|---|---|
|
GrpAddr |
Specifies the IP multicast address of the group traversing the router. |
|
SrcAddr |
Specifies the IP source address of the multicast group address. |
|
OutVlan |
Specifies the egress VLAN ID for the multicast group. |
|
OutPort |
Specifies the egress port of the multicast group. |
|
InVlan |
Specfies the ingress VLAN ID for the multicast source. |
|
InPort |
Specifies the ingress port for the multicast group. |
|
Type |
Specifies the port type on which the snoop entry is learnt. |