View LLDP-MED Local Policy Information
About this task
Perform this procedure to view policy information for local LLDP-MED on specific ports.
Procedure
- In the navigation pane, expand .
- Click Port MED.
- Click the Local Policy tab.
Local Policy Field Descriptions
|
Name |
Description |
|---|---|
|
PortNum |
Specifies the port. |
|
PolicyAppType |
Specifies the application type. |
|
PolicyVlanId |
Specifies the VLAN ID for the port, as defined in IEEE 802.1Q-2003. The value 0 is used if the device is using priority tagged frames, which means only the 802.1D priority level is significant, and the default VLAN ID of the ingress port is used instead. |
|
PolicyPriority |
Specifies the Layer 2 priority used for the specified application type, as defined in IEEE 802.1D-2004. The default is 0. |
|
PolicyDscp |
Specifies the value of the Differentiated Service Code Point (DSCP) associated with a specific port on the local LLDP-MED, as defined in IETF RFC 2474 and RFC 2475. The default is 0. |
|
PolicyTagged |
Specifies whether the application uses a tagged or untagged VLAN, as defined by IEEE 802.1Q-2003.
|