Configure Multi-area SPB L2 Multicast I-SID List Redistribution for Remote Area

Note

Note

This procedure only applies to the VSP 7400 Series.

About this task

Perform this procedure to configure the Multi-area SPB layer 2 multicast I-SID list redistribution for the remote area.

Procedure

  1. In the navigation pane, expand the Configuration > Fabric folders.
  2. Select MultiArea.
  3. Select the L2 MC Redist Remote ISID List tab.
  4. Select Insert.
  5. In the ISID List Name field, type the name of the I-SID list.
  6. Select Enable.
  7. Optional: In the PolicyName field, type the policy name.
  8. Select Insert.

L2 MC Redist Remote ISID List Field Descriptions

Use the data in the following table to use the L2 MC Redist Remote ISID List tab.

6
Name Description

ISID List Name

Specifies the name of the I-SID list.

Enable

Enables Multi-area SPB layer 2 multicast redistribution for the specific I-SID list in the remote area.

PolicyName

Specifies the name of the redistribution policy.