Configuring Rate Limits on an Extreme Integrated Application Hosting Port

Note

Note

This procedure only applies to VSP 4900 Series and VSP 7400 Series.

About this task

Perform this procedure to configure the rate limit of broadcast or multicast packets and determine the total bandwidth limit on the Extreme Integrated Application Hosting (IAH) port.

Procedure

  1. In the navigation pane, expand Configuration > Edit > Insight Port.
  2. Select the IAH port you want to configure.
  3. Select the Rate Limiting tab.
  4. In the AllowedRatePps column, enter a time duration for the specific Extreme Integrated Application Hosting port.
  5. In the Enable column, select true to enable rate limiting for the specific IAH port.
  6. Select Apply.

Rate Limiting Field Descriptions

Name

Description

Index

Specifies the Extreme Integrated Application Hosting (IAH) port.

TrafficType

Shows the traffic type.

AllowedRatePps

Specifies the allowed traffic rate limit for the IAH port in packets per second (pps).

Enable

Enables or disables rate limiting for the specific IAH port. The default is false (disabled).